B-inox 400 railing with clamps

Railing consisting of 50x12 solid uprights. Standard is supplied with glass clamps already mounted in the end-uprights with two clamps each, the lower clamp with a clamp stop for a more secure fixture. In the intermediate uprights there is a double clamp to join the two panels, the lower clamp also with a stop.

PZ-2 clamps are fixed in the front part of the upright.

For staircases, the clamp has been fabricated with a specific degree of incline for a better support of the glass panel.

The top handrail can be made of 50x20 tube or 43mm round tube.

The upright height can be modified depending on the project. For example, if mounted on a low wall for which a certain height is needed to comply with required Standards, it could be produced.

It can be anchored on the floor or on a concrete slab, providing the end caps in both cases. 

Finishes can be polished or satin. The quality of the steel can be Aisi 304 or Aisi 316L according to where the railing is placed. For sea or pool areas, Aisi 316 is recommended and Aisi 304 for the rest of locations.